EFFECTA COMPLETE · Self cleaning · Service 2-3 times/year · Built in room control · Electrical heater 3,6 or 9kW     Effecta Complete Specifications       Grate height 500 mm Grate diameter 550 mm Grate volume 117 litres Flue connection, diameter 140 mm Electrical connection 380 VAC Water volume 183 litres Connection hot water 22 mm Connection shunt valve 22 mm Power output 12-20 kW Max working pressure 1,5 bar Min neg.pressure, flue 1,2 pa Weight 280 kg Warranty 2 years

NEW TECHNOLOGY

Effecta Complete is contstructed for the end user. The house owner will have a comfortable and efficient heating system, with few services around the year and a low energy cost. The highly effective convective part in the boiler increases the efficiency to more than 90%. This means the consumption of pellet is very low, and then of course the production of ashes and dirt remains very low. Furthermore, the Effecta Complete has a very big room for ashes, about 5-7 tons of pellet can be burnt before even considering emptying the grate. The convective part is automatically cleaned by a magnetic motor lifting the tubulators up and down. Also the burner is automatically cleaned, a compressor manage this. 
In the control panel on the front of the boiler all settings are made, such as power outlet of the burner, times for cleaning/not cleaning, the indoor climate etc. etc. The settings are easily changed in the different menues.  

The Effecta Complete is delivered fully assemblied. Both the electrical wiring and the casing are done. This means that the installer has fewer issues when commissioning the boiler. The bottom plate makes the boiler easy to push around in the boiler room floor to the right position. The elbow provided can be altered in almost any possible way. Also, all settings in the control panel are made from the factory, only fine tunings needs to be done. All this put together, and more, means an easy installation with no problems, that also results in correct use of the product.